Futronic FS88H Fingerprint Scanner

Installation & Setup

1. Download and Install the Driver
   1. Login to the Customer Connect.
   2. Click the SUPPORT link and select Downloads.
   3. Click VIEW MCS DOWNLOADS.
   4. Locate and click on the Newton folder to open it.
      
   5. Locate and click on the Peripherals folder to open it.
      
   6. Select the Install_FutronicsFingerScannerSupport.exe file. Then, select correct driver to download for your operating system.
      1. Select ftrDriverSetup_win8_whql_2307.exe for Windows 8 or higher.
      2. Select ftrDriverSetup_winxp_vista_win7_whql_2307.exe for Windows XP, Vista, or Windows 7.
   7. Locate the downloaded driver .exe file on your computer and double-click to begin the installation process.
      
   8. Follow the on-screen directions to complete the installation process.
   9. Locate the downloaded support .exe file on your computer and double-click to begin the installation process.
      
   10. In the Futronics Finger Scanner Support Setup window, you are alerted to close all other applications before starting setup. Once you have closed other programs, click Next.
       
   11. Choose which components you would like to install by checking/unchecking components. Then, click Next.
       
   12. You will see installation processes running. Once installation processes have completed, click Next.
       
   13. Click Finish to complete the installation process.
       
2. Login to Newton and connect the fingerprint scanning device.
3. Establish the biometric engine - Locate and click on the Administration and Maintenance tab. In the Newton tab, locate Biometric Engine and use the drop-down menu and select AFIS. When you are done, click Ok.
   
4. Establish Serving Line configurations
   1. Locate the Serving Line option in the Point-of-Sale Setup ribbon.
   2. Select either Serving Lines or Serving Line Configs depending on if your District uses line or a particular template. If you are unsure, check with your point of contact in the District.
      

5. Configure the Device in Newton

   Step 5 includes instructions for both Serving Line and Serving Line Configs. Choose the correct section your District utilizes for setup.

   1. In the Serving-Line Maintenance window, select a cafeteria line by clicking on a row or using the drop-down arrow and click the Edit button. If you use the drop-down arrow, be sure to select the proper serving line to install the device.
      
   2. Click on the Override Settings tab.
   3. Scroll down and locate the Devices section in the parameters.

   4. Once you have located the Devices section click on Customer Input Device #1, then the ellipsis button in the Normal/Primary Value column to establish the device for all meals sold on this serving line.

      

   5. Use the drop-down arrow to locate and select Fingerprint Scanner.
      

   6. Ensure the Scanner Type is set as Futronics. If it is not, click in the cell to use the drop-down menu and make the correct selection. Then, click Ok.

      Connecting Multiple Devices to One Serving Line

      If you are connecting more than one finger scanner to the same serving line, leave Customer Device Index #1 Device Index at 0. Set Customer Device Index #2 Device Index to 1.

      
      

6. Click Ok in the Edit Serving Line window to apply changes.
7. Test the fingerprint scanning device.

Test the Futronics fingerprint scanning device by starting a new meal. Ensure Newton is recognizing meals served in the system.

Return to Top

Enrollment & Usage

1. Start the operating day.
2. Start a new meal.
3. Open NewtonPOS and login.
   

4. Serving Line window - Click Enroll to begin fingerprint enrollment.

   • In the bottom left-hand corner, notice which device is set for the serving line.
   • In the bottom right-hand corner, the status of the device is shown. If it working properly, you should see Running. If the device is not functioning properly, you will see Error. Click on Error to review the message.

   

5. Select the student by entering the student number or by selecting the student from the list.
   
6. Several scans will be necessary to ensure a student's identity.
   
   1. Have the student place his/her finger on the scanning device.
      
   2. As the fingerprint is captured, the status bar progresses until there are enough good scans to register the student.
   3. If a student switching fingers in the middle of scanning. click the Start Over button.
      
      

Once a student has been successfully enrolled, they must use the same finger for every meal. The scanner should recognize the print and pull up the student.

Continue the process by normal serving procedures.

Return to Top

After you have finished with line servings, click the Quit Serving Line button to exit Newton POS.

Then, click the Exit Point-Of-Sale button.

Be sure to return to the main machine and stop the meal and post transactions for the day.

Return to Top