Page Comparison

Download a PDF bi-fold of these instructions:

...

1. Log in to Customer Connect.
2. Access MCS Public Downloads > Newton > Peripherals.
3. Download PAXS300USBDriver_V1.00_20151112.zip.
4. Unzip the download and run the executable to install the driver.

...

1. Login to Newton.
2. Locate and click on the Admin & Maintenance tab.
3. Locate the Serving Line  option in the Point-of-Sale Setup ribbon.
4. Select either Serving Lines or Serving Line Configs depending on if your District uses line or a particular template. If you are unsure, check with your point of contact in the District.
5. Select an existing serving line or serving line config and select Edit.
   Image Modified
   
6. Select the tab labeled Override Settings and scroll down the options to Devices.
7. Locate the option for Credit Card Terminal and select into each field to show the eliipsis.
   

8. Select PAX S300 or compatible from the drop-down menu. Then, configure the Capture Signature and Port options. When finished, click Ok.
   

   Expand
   title How to check which COM Port is assigned to your Credit Card Reader
   If you are not sure of the Com Port assigned to the Credit Card Reader, perform the following steps. Open Device Manager on your computer. Expand Ports (COM and LPT) and take note of which Port is assigned to Serial USB.

   

   Note
   Once you setup the PAX S300 Credit Card reader, the settings will apply to each Meal Type Override.

   
   

9. When finished, select Save & Close.

...

Return to Top