Page Comparison

Installation & Setup

1. Plug the USB into the computer.

1. Establish Serving Line configurations
   
   1. Login to Newton. 
   2. Locate and click on the Administration and Maintenance tab.
   3. Locate the Serving Line option in the Point-of-Sale Setup ribbon.
   4. Select either Serving Lines or Serving Line Configs depending on if your District uses line or a particular template. If you are unsure, check with your point of contact in the District.
      Image Modified

1. Configure the Device in Newton

   Note
   Step 3 includes instructions for both Serving Line and Serving Line Configs. Choose the correct section your District utilizes for setup.

   1. In the Serving-Line Maintenance window, select a cafeteria line by clicking on a row or using the drop-down arrow and click the Edit button. If you use the drop-down arrow, be sure to select the proper serving line to install the device.
      Image Modified
   2. Click on the Override Settings tab.
   3. Scroll down and locate the Devices section in the parameters.
   4. Once you have located the Devices section click on Customer Input Device #1, then the

1. 1. ellipsis button.
      

1. 1. Image Modified

1. 1.  Use the drop-down arrow to locate and select Genovation 900 series (HID) Series.
      Image Modified
   2. Establish line settings

1. 1. - Device Index - The device index typically remains at 0.

1. 1. Click Ok when you have completed adjusting the settings.
      Image Modified

1. 2. Click Ok again to exit out of the Edit Serving Line window.

1. 2. Click Close in the Serving-Line Maintenance window.

1. Test the

1. pin pad device.

Test the

pin pad device by starting a new meal. Ensure Newton is recognizing meals served in the system.

Return to Top

Usage

Return to Top