Page Comparison

Installation & Setup

1. Download and Install the Driver

1. 1. Login to the Customer Portal and select Download Software from the Common Links section.
   2. Locate and click on

1. 1. the Newton

1. 1.  folder to open it.
      

1. 1. Image Added
   2. Locate and click on the ftrScanAPI_64bit.zip file to download the file.
      Image Modified
   3. Locate the downloaded .zip file on your computer and double-click to begin the installation process.
      Image Modified
   4. In the Open File - Security Warning window, uncheck Always ask before opening this file. Then, click Run.
      Image Modified
   5. In the Futronics Finger Scanner Support Setup window, you are alerted to close all other applications before starting setup. Once you have closed other programs, click Next.
      Image Modified
   6. Choose which components you would like to install by checking/unchecking components. Then, click Next.
      Image Modified
   7. You will see installation processes running. Once installation processes have completed, click Next.
      Image Modified
   8. Click Finish to complete the installation process.
      Image Modified

1. Login to Newton and connect the fingerprint scanning device.

1. Establish the biometric engine

1. - Locate and click on the Administration and Maintenance tab. In the Newton tab, locate Biometric Engine and use the drop-down menu and select AFIS. When you are done, click Ok.
   Image Modified

1. Establish Serving Line configurations
   1. Locate the Serving Line option in the Point-of-Sale Setup ribbon.
   2. Select either Serving Lines or Serving Line Configs depending on if your District uses line or a particular template. If you are unsure, check with your point of contact in the District.
      Image Modified

1. Configure the Device in Newton

1. Note
   Step

1. 5 includes instructions for both Serving Line and Serving Line Configs. Choose the correct section your District utilizes for setup

1. .

   1. In the Serving-Line Maintenance window, select a cafeteria line by clicking on a row or using the drop-down arrow and click the Edit button. If you use the drop-down arrow, be sure to select the proper serving line to install the device.
      Image Modified
   2. Click on the Override Settings tab.

1. 1. Scroll down and locate the Devices section in the parameters.
   2. Once you have located the Devices section click on Customer Input Device #1, then the

1. 1. ellipsis button.
      Image Modified
   2. Use the drop-down arrow to locate and select Fingerprint Scanner

1. 1. .
      Image Modified

1. 1. Ensure the Scanner Type is set as Futronics. If it is not, click in the cell to use the drop-down menu and make the correct selection.
      Image Modified

1. Test the fingerprint scanning device.

Test the Futronics fingerprint scanning device by starting a new meal. Ensure Newton is recognizing meals served in the system.

Return to Top

Enrollment & Usage

1. Start the operating day.

1. Start a new meal.

1. Open NewtonPOS and login.
   Image Modified

1. Serving Line window - Click Enroll to begin fingerprint enrollment.

   Info
   In the bottom left-hand corner, notice which device is set for the serving line. In the bottom right-hand corner, the status of the device is shown. If it working properly, you should see Running. If the device is not functioning properly, you will see Error. Click on Error to review the message.

1. Image Modified

1. Select the student by entering the student number or by selecting the student from the list.
   Image Modified

1. Several scans will be necessary to ensure a student's identity.
   
   1. Have the student place his/her finger on the scanning device.
      Image Modified
   2. As the fingerprint is captured, the status bar progresses until there are enough good scans to register the student.
   3. If a student switching fingers in the middle of scanning. click the Start Over button.
      Image Modified
      Image Modified

Once a student has been successfully enrolled, they must use the same finger for every meal. The scanner should recognize the print and pull up the student.

Continue the process by normal serving procedures.

Image Modified

Return to Top

After you have finished with line servings, click the Quit Serving Line button to exit Newton POS.
Image Modified

Then, click the Exit Point-Of-Sale button.
Image Modified

Be sure to return to the main machine and stop the meal and post transactions for the day.

Return to Top