Versions Compared

Old Version 28

changes.mady.by.user Robin Rodrigue

Saved on

compared with

New Version 29

changes.mady.by.user Robin Rodrigue

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel

 

Section
Column
width40%

Futronic's FS80 USB2.0 Fingerprint Scanner uses advanced CMOS sensor technology and precise optical system to deliver high quality fingerprint image. It can capture an almost un-distorted raw fingerprint image into PC in 100ms and is good for any fingerprint recognition application.

The finger scanning window is a crown glass with a thickness of 14mm. It is much more reliable and robust compared to any semiconductor type fingerprint sensor.

The finger is illuminated by 4 infra-red LEDs during scanning and the light intensity is automatically adjusted according to scanning fingerprint's characteristics (wet, dry, blurred, etc) to optimize the quality of the captured fingerprint image.

Special electronic circuit is built into FS80 to do Live Finger Detection (LFD). With appropriate software in PC, user can select this LFD feature so that only live finger's fingerprint will be scanned into PC. Fake fingers made from silicone rubber, play-doh, etc, will be rejected. And the LFD feature is included in all Futronic's standard software.

Column
width5%

 

Column
width55%

 

...

Installation & Setup

Info

Ensure you have the most recent version of Newton POS by running upgrades in AdminConsole.

Step 1 : Download and Install the Driver

...

Step 2: It may be necessary to complete this step if the driver does not work properly. Performing this step will allow NewtonPOS to re-upgrade itself and trigger the post-deploy.

  • While holding down the Control (Ctrl) key on the keyboard, use the mouse to click on each file in the folder.

...

  • Download the InstallNewtonPOS.exe file from the MCS Software Downloads website and run the installation process.

Image Modified

Step 3: Login to Newton and connect the fingerprint scanning device.

Step 4: Establish the biometric engine

...

 

Note

Step 6 includes instructions for both Serving Line and Serving Line Configs. Choose the correct section your District utilizes for setup.

 

  • Serving Line - Click on the Serving Line option.
Section Columnwidth40%
    • In the Serving-Line Maintenance window, select a cafeteria line by clicking on a row or using the drop-down arrow and click the Edit button. If you use the drop-down arrow, be sure to select the proper serving line to install the device.
Column
width5%

 

Columnwidth55%
 

Image Modified

Section Column
width40%
 Click
    • Click on the Override Settings tab.
       
    • Scroll down and locate the Devices section in the parameters.
    • Once you have located the Devices section click on Customer Input Device #1, then the ellipsis Image Modified button.
Column
width5%

 

Columnwidth55%
 

Image Modified

Section Column
width40%
    • Use the drop-down arrow to locate and select Fingerprint Scanner.
Columnwidth5%

 

Column
width55%
 

Image Modified

Sectioncolumn


width40%
    • Ensure the Scanner Type is set as Futronics. If it is not, click in the cell to use the drop-down menu and make the correct selection. 
Columnwidth
5%

 

Column
width55%
 

Image Modified


  • Serving Line Configs - Click on the Serving Line Configs option.
Section Columnwidth
    40%
      • In the Serving-Line-Configuration Maintenance window, click the Edit button.
    Column
    width5%

     

    Columnwidth
    55% 

    Image Modified

    Section Columnwidth40%


      • Scroll down and locate the Devices section in the parameters.
      • Once you have located the Devices section click on Customer Input Device #1, then the ellipsis Image Modified button.
    column
    width5%

     

    Column
    width55%
     

    Image Modified

    Section Column
    width40%
      • Use the drop-down arrow to locate and select Fingerprint Scanner
    Columnwidth
    5%

     

    Column
    width55%
     

    Image Modified

    section


    Column
    width40%
      • Ensure the Scanner Type is set as Futronics. If it is not, click in the cell to use the drop-down menu and make the correct selection.
     column
    width5%

     

    Column
    width55%
     

    Image Modified

    Step 6: Test the fingerprint scanning device.

    ...