Page Comparison

1. From the Utilities tab, select the Direct Certification menu and choose the Import File option.
   

   Note
   If you already have DC Import Configurations established, you may be asked to select which one to use. Choose an Import Configuration and click Ok if this is the case. (The Import DC File window configurations will vary from the image below.) Image Modified

1. Click the ellipses

1. icon and locate the DC Filename on your computer or network. Select Ok to begin the import.

   Info
   title DC File Source

1. If "Require DC Source" is enabled in system settings and is missing from the import file, the process will be halted. You may locate and correct the issue in the import file or disable the system setting to Require the DC Source. Before correcting the DC file, you should check with your District or State contact to ensure the student and DC Source are correct. Image Added

   Image Added

2. From the Utilities tab, select the Direct Certification menu and choose the Perform District Match option.

1. In the District/Manual DC Matching window, select Run Auto-Match.
   _{(Notice in the example below that some symbols are included in the list. Those students will likely need to be manually matched.)}
   Image Modified

2. Anchor
   FR11609 FR11609

1. The District/Manual DC Matching window will appear.

   Warning
   There is NO UNDO available.

   1. Select a matching criteria
      • Strict 3-Point Match (SSN, Name, and DOB)
      • Name 2-Point Match (Name + one or more of the following: SSN, DOB, Address, Head of Household Name, and/or Last 4 of Adult SSN)
      • SSN 2-Point Match (At least two: SSN, Name and/or DOB)
   2. Check off the box to queue letters. You will be informed that "DC letters WILL print" or "DC letters will NOT print." Letter printing options are setup in System Settings.

1. 2. Click Ok when you are ready to proceed with running the district match process.
      Image Modified
      You will see the Auto-Match process run.
      Image Modified
   3. The number of matched records will be indicated in the District/Manual DC Matching window. Click Ok.
      Image Modified

Run Manual Match

After you have run the District Match process, you may now choose to run a manual match.

1. Select a student by clicking on a row and then click Manual Match or double-click on the student to bring up the Student Match window.
   Image Modified
   

1. A fuzzy match will run and open  the Student Match window. The higher the number, the better match. If you are sure you have found a match, click Match Found and the student in question will be directly certified. If you have not found a match, click No Match Found and the student will remain in the District/Manual Matching list.
   Perform this action on remaining students in the list.
   Image Modified
   Image Modified
   

Print DC Notification Letters

1. From the Home tab, locate and click on Print Letters in the Letters ribbon.

1. Choose which letter type to print and how to sort the letters. When you have completed setting up print options, click Ok.
   
   1. Kinds of Letters to Print - If you have setup a separate template for DC Letters, use the drop-down menu to select the correct letter, otherwise, leave the Normal Letters default selected.
   2. Letter Sort Order - Use the drop-down menu to choose how letters should be sorted for printing.
      Image Modified

2. The print batch window will appear notifying you of the number of letters that remain to be printed. Click OK to open the print preview screen.

   Note
   Selecting Cancel in the Print Next Batch window or

1. clicking Close Print Preview prior to printing letters will leave the unprinted letters in the queue. Letters will only move out of the print queue when a print job is executed.

   Image Modified