Page Comparison

⬆ Be sure you are running Franklin

14.0 or higher.

If any of the requested applications cannot be met (case-number, error-prone, or random), a warning message is generated, and the user is prompted whether to accept the sample anyway or to cancel the sample generation process.

Build Sample Set

1. From the Utilities menu,

1. select the Verification tab and

1. choose Sample Sets. 

2. In the Verification Action tab, locate and click on Build New Sample Set

1. .

1. Image Modified

2. Select the

1. number of applications to pick.

   The system will display the number of approved applications on file and pick the designated percentage (rounded up) for verification. The software will allow you to increase or decrease this amount. This helps ensure a sufficient number of applications are chosen (extra applications can be removed later). To modify the number of applications chosen, click in the Applications to Pick field and type in a different amount. Click OK when you are ready to proceed.
   

1. Note: Error-prone applications are always selected first. An error-prone application

1. is within $100 of qualifying from Free to Reduced or Reduced to Full Pay.

Image Added

Verify for Cause

Verify for Cause

is utilized when you have been asked to include a child in the verification process or choose to select a child for verification.

1. Locate and click on the Home tab, and select the Student Lookup menu.

2. Search for the Student using the procedure found in Locating a Student Record.
   

   Image Modified

3. Highlight the Student's Record and select View/Edit Student

1. .

1. 
   

   Image Modified

2. Locate and click on the Verification button in the Panels ribbon.
   

   Image Modified

3. In the Verification window, click the Verify For Cause button.
   

1. Image Added

2. Enter a comment as to why this household is being verified for cause. When you are done, click Ok.
   Image Modified
   The Verification button will now have a green flashing

1. checkmark indication the student has been selected for verification status.
   Image Modified

Review

and Commit Applications in the Sample Set

Once built, a Sample Set needs to be reviewed. During the review process, students can be removed from the set, and additional students can be added as needed.

Select a row to remove a Sample Set

and click the Delete Sample Set button

.

1. In the Verification Sample Sets tab, select a sample set to review by clicking the row and then clicking Review Sample Set.
   

   Image Modified

2. To review individual applications, select a row and then click the Review Selected or double-click on a row. This brings up the student's record, allowing for application review and editing.

1. 
   You may choose the Confirm All button if you qualify for the LEAs waiver §245.6a(e)(1)(ii).
   

1.  Image Added
   Review Selected - Opens the Confirm Verification Selection window for the selected student.
   Confirm All - Allows confirmation of all students. This should not be used unless you qualify for LEA waiver §245.6a(e)(1)(ii).
   Reject All - Allows you to reject all students in the Sample Set.
   

2. In the Confirm Verification Selection tab, the student will appear.

1. 
   The person who originally confirmed the application should not be the person performing the confirmation review.

1.  

2. To further review and/or

1. change a student's application, click the 

1. View Student button. Once you have reviewed the student's application,

1. choose if you would like to Confirm and Commit the student or if you would like to Reject and Remove the student from the verification sample set. 

Image Modified

In the Verification Sample Sets window, the system shows the number of confirmed and rejected applications. The total Confirmed Count from all Sample Sets is located at the bottom of the screen. Make sure that your total Confirmed Count is in compliance with the USDA regulations.
Image Modified

Verification Reports

Once you have created and committed sample sets, run a Verification Sample report. 

Verification Letters

Setup Verification Letters

1. From the 

1. Admin and Maintenance tab, locate the Miscellaneous Setup menu. Then, select Letters and choose the Letter Templates option.

2. Choose Add

1. to create a new letter.
   

1. Image Added

2. In the Report Designer, click the Folder

1.  icon to open the Windows search window.
   

   Image Modified

2. Locate and click on the template file (.repx) you wish to import. After you have selected the file, click Open.

1. 
   
   You will see the template in the Report Designer. If you need to

1. change the template, refer to the Letters section in Miscellaneous Setup.
   

1. 📅 You MUST change the date(s) during the letter import process as they are part of the text and not a field.
   

2. After you have made the necessary changes, click the

1. Save icon. It is important that you do not choose Save As. The Save As option will save the file to your computer and not in the software.

   Image Modified

2. In the Save Letter Template as window, assign a name to the letter template.
   

   Image Modified

   
   You will notice the new letter

1. appears in the Letter Template Maintenance tab.
   

   Image Modified

2. From the 

1. Admin and Maintenance tab, select the Miscellaneous Setup menu. Then, select Letters and choose the Letter Batch Kinds option.

2. Create a new Custom Batch.

   1. Under the Description column, click

1. 1. into the empty space marked with an asterisk * (typically the last row) and enter a description name.

   2. Choose a Letter Template from the drop-down menu.

   3. Choose an Output type (Print or Export).

   4. Click Save Changes.
      

      Image Modified

2. Establish Letter Reasons. 

   Click the (+) next to Normal Letters or another location where Verification Letter Reasons reside. Drag and drop the letter reason Verification Selection to the new Custom Batch.

   You can create a separate Letter Batch Kind for additional Verification Letter Reasons if you choose. Make sure you do not select the Verification Packet template. When you are done, click Save Changes.
   Image Modified

Print the Verification Notification

Letters 

1. From the Home tab, locate and click on Print Letters in the Letters ribbon.

2. Choose which letter type to print and how to sort the letters. When you have completed setting up print options, click Ok.

   1. Kinds of Letters to Print - If you have

1. 1. set up a separate template for Verification Letters, use the drop-down menu to select the correct letter. Otherwise,

1. 1. leave the Normal Letters default selected.

   2. Letter Sort Order - Use the drop-down menu to choose how letters should be sorted for printing.
      

      Image Modified

2. The print batch window will appear notifying you of the number of letters that remain to be printed. Click OK to open the print preview screen.

1.  Selecting Cancel in the Print Next Batch window or clicking Close Print Preview

1. before printing letters will leave the unprinted letters in the queue. Letters will only move out of the print queue when a print job is executed.
   

   Image Modified

2. Review letters in the print preview window. When you are ready to print, click the

1. printer icon. 

Sample Letter Packet

Verification Letter Templates

• VerificationLetterPacketRev2

• VerificationPacket-foldingRev

• VerificationSelectionLetter_8x14legal (2)

Expand
title View Verification Letter (legal-size) Sample
Image Modified Image Modified

Expand
title View Verification Notification Packet Sample
Image Modified Image Modified