Page Comparison

Page Tree Search

rootPage	Edison Home

Panel

bgColor	#ffffff
titleColor	#ffffff
titleBGColor	#3783E3
title	Overview

The Recipes & Menus section will take you through the process of editing and adding recipes, recipe categories, recipe delivery units, menu count types, fat change types, critical control points, menus, menu categories, menu templates, and production areas.

AnchorTopTopRecipesMenusRecipe CategoriesMenu CategoriesRecipe Delivery UnitsMenu TemplatesMenu Count TypesProduction AreasFat Change TypesManufacturing GroupsCritical Control PointsMass Update

Opening Recipes & Menus

This procedure is used to access all processes in the Recipes & Menus section.

Locate and click the Administration tab. Next, click on the Recipes & Menu option.

Image Removed

AnchorRecipesRecipesRecipes

After items have been added to the system, recipes are created. Recipe creation allow you to add a description, recipe number, short description, external description and code for broadcasting purposes, required temperature (if applicable), and photo. You have the ability to select a recipe category, menu item type, delivery mode, and production area. Steps and ingredients are entered to produce a recipe. This can be setup in order for a recipe to be manufactured from scratch (such as blueberry muffins) or assembled (such as Asian chicken salad). Total recipe yield, delivery units, manufactured item (if applicable), nutritional values, and serving sizes (which may vary between grades) are also established.

From the Recipes & Menus option, select Recipes.

Info

title	The Recipe Maintenance Window

The Recipe Maintenance window displays the Recipe Number, Description, Short Description, recipe Category, Menu Item Type, Manufactures Item (Item # resulting from manufacturing), Manufacturing Group, Inactive recipes, and comments if a recipe Needs Attention.

Click Add Recipe. If you are adding to a recipe that already exists, locate and click on the recipe before selecting Add Recipe.

Note
You may also select an item and click Edit Recipe or Delete Recipe.

Image Removed

Select how to create a new recipe.

As a new blank recipe - Information in all tabs is blank.
As a copy of the current selected recipe - By default, the first recipe is already selected. You may highlight a recipe from the list and create a copy. All information from the existing recipe is carried over to the copy.
Image Removed

Establish all recipe components. Then, click Save Changes. AnchorEDISON11119EDISON11119

Expand

title	Recipe Info

Recipe Info allows you to enter a long, short, and external description, recipe number, export code, recipe category, menu item type, delivery mode, HACCP information such as temperature, process type, and production area. You can also enter pan size, number of pans, a photograph of the completed recipe, and flag a recipe that needs further attention.

Establish Recipe Info.

1. Description - Enter a description of the recipe.
2. Recipe Number - Enter the recipe number.
3. Short Description - Enter a short description of the recipe.
4. External Description - Enter an external description of the recipe. (Used to broadcast recipes to the web.)
5. Export Code - Enter the export code. (Used to broadcast recipes to the web.)
6. Recipe Category - Use the drop-down menu to select a recipe category (Breads/Grains, Entree, Fruit/Veg, Milk, Uncategorized).
7. Menu Item Type - Use the drop-down menu to select a menu item type (Entree, Side Dish, Milk, Condiment, Non-food Item, Other).
8. Delivery Mode - Use the drop-down menu to select a delivery mode (Any, Ready To Assemble, Ready To Serve).
9. Temperature (F) - Enter a temperature to display on the recipe instructions.
10. Pan Size - Enter the size of the pan to display on the recipe instructions. (Not required.)
11. Number of Pans - Enter the number of pans a recipe will yield to display in the recipe instructions. (Not required.)
12. Process Type - Use the drop-down menu to select the HACCP process type (No Cook, Same Day Service, Complex Food Preparation).
13. Require Temperature Log - Requires temperature to be entered during Production process.
14. Production Area - Use the drop-down menu to select a production area (Bread, Default, Dessert, Fruit, Main Dish, Side, Vegetable).
15. Photo - Allows you to attach a photo of the finished recipe.
16. Needs Attention - If there is a possible issue with the recipe (nutrition contribution, missing item, etc.), place a checkmark in the box and enter a statement.
  Image Removed

Uploading a Photograph

1. Click on the image icon Image Removed.
2. An image box will appear. Right-click in the box and select Load.
  Image Removed
3. Locate a select the file on your local or network drive. Then, click Open.
  Image Removed
4. The image will appear in the window. Click Ok.
  Image Removed

AnchorED12354ED12354 AnchorED12728ED12728

Expand

title	Steps & Ingredients

Steps & Ingredients allows you to establish steps for preparing, creating, cooking, and warming recipes.

Establish Steps & Ingredients.

1. Step Title - Enter a step on the row with the asterisk *.
  Note
  When you begin to enter information into the Step Title field, the Step # will appear as a code until you click outside of that row.
2. Critical Control Point (CCP) - Use the drop-down menu to select from a list of CCPs (if applicable).
3. Instructions - Enter a list of instructions in the drop-down menu. These will appear on the recipe instructions report.
4. Photo - Photographs can be added at the step level by following the same procedures under Recipe Info.
  Image Removed

Add Ingredients to Steps

1. Click the plus + sign to expand a step.
2. Enter a Catalog Number or Description in the correct column. Then, press Enter on the keyboard to open a list of items.
  Image Removed
3. Select the correct item from the list. Then, click Ok.
  Image Removed
4. Enter a measurement.
  Note
  The weight will automatically be calculated according to item setup.
  Image Removed

Repeat the process until all ingredients and steps have been added.

Expand

title	Yield & Serving Sizes

Yield & Serving Sizes allows you to establish totals for each completed recipe and how a recipe can be distributed, determine if the recipe produces a completed item through manufacturing, and establish serving sizes depending on menu count types.

Info

title	Delivery Unit/Delivery Sub-Unit

Delivery Unit and Delivery Sub-Unit are typically not selected. These exist to maintain the integrity of a legacy option.

Establish Yield & Serving Sizes.

Yield

Yield - Use the drop-down menu to select a measurement type. Then, enter a quantity for the total the recipe yields/creates.

Note
You may enter free-text when selecting each (ea) to identify what "each" represents (e.g. slice, 2 oz. cup).

Delivery Unit - Use the drop-down menu to select a delivery unit. Then, enter the number of base-units from the yield quantity per delivery unit.

Delivery Sub-Unit - Use the drop-down menu to select a delivery sub-unit. Then, enter the number of base-units from the yield quantity per sub-delivery unit (if applicable).

Manufactures Item - Links or creates a recipe to an item/manufactured item.

Note

title	Manufacturing and Inventory Counts

By completing the manufacturing process, ingredient items will be removed from inventory. The completed item will be placed in inventory for availability.

Info

title	Gear Icon

Clicking the gear icon opens the linked or created item in a new tab.

Link an Item to a Recipe - Place a checkmark in the box to activate the magnifier icon to search and select an item from the list of available items.
Create a Manufactured Item from a Recipe - Click the plus icon to create a new manufactured item. A tab will open allowing you to complete Item setup details for the newly manufactured item.

Manufacturing Group - Use the drop-down menu to select the correct manufacturing group (if applicable). Typically, Central Kitchens will use this option.

Image Removed

Serving Sizes

Serving Sizes can be established when portion sizes vary.

1. Establish serving sizes where applicable.
  1. Description - Enter a description.
  2. Portion Size - Enter the portions for the serving size description. (e.g. Grades 6-8 receive .75 cup of diced fruit; Grades K-5 receive 2 mini muffins)
  3. Unit - Units are designated during item setup and cannot be changed.
  4. Weight - Weight is designated during item setup and cannot be changed.
  5. Servings - The number of servings will automatically recalculate once portion size is entered.
  6. Servings per Delivery Unit - Servings per Delivery Unit are designated during item setup and cannot be changed.
  7. Menu Count Types - Place a checkmark in each Menu Count Type to designate which portion sizes will be served.
2. Click the plus sign cent to each serving size description to establish food contributions.
  Image Removed

Expand

title	Nutrition

Nutritional information is provided for recipes based on nutritional factors established in Items or by keying values from the food label. Additionally, fat and moisture changes can change nutritional values due to cooking.

Establish Nutrition.

1. If nutritional values do not exist, click Key from Food Label or edit nutritional information at the Item level. You may run the Calculate Nutrition report for additional details.
2. Fat change after cooking - Use the drop-down menu to select a Fat Change Type. Then, enter the percentage of fat change.
3. Moisture change after cooking - Enter the percentage of moisture change after cooking.
  Info
  Nutrition will need to be recalculated if fat or moisture changes are applied. To view an example of how fat and moisture percentages change after applied, review the example in Fat Change Types.
4. This recipe is a grain-based dessert - Place a checkmark in the box is the recipe is a grain-based dessert.
  Image Removed

Key from Food Label

1. If nutritional values are not present, click Key from Food Label.
2. Enter nutritional values. Then, click Ok.
  1. Nutritional Information is per - Use the drop-down menu to select a measurement. Then, enter the numerical value.
  2. Enter USDA Nutrient values.
    Image Removed

Calculate Nutrition

1. To review calculated nutritional values, click Calculate Nutrition.
2. Uncheck the box if you do not want to Show All Nutrient Data. Then, click Ok.
  Image Removed
3. Review the report. You may choose to print or export the report. After you have finished printing or exporting, click Close Print Preview.
  Image Removed
  Image Removed

AnchorED13679ED13679

Expand

title	Notes and Comments

The tab includes free text blocks for Comments, Production Notes & Serving Notes. WinFSIM conversions will prefill the note tab should a recipe include any of the above notes. When printing a manufacturing recipe, if the site printing the recipe does not manufacture, the production & serving notes will print & the manufacturing instructions will not print.

Enter necessary Comments, Production Notes, and Serving Notes that you would like to include in reports.

Image Removed

AnchorED11649ED11649

Expand

title	Allergens

The Allergens tab allows to you review allergens within a recipe.

Info
In order for allergens to appear, they must be established at the item level (e.g. Grilled cheese recipe - milk and wheat allergens will be carried forward from noting milk as an allergen in cheese and wheat as an allergen in bread).

Image Removed

You may wish to Test Print Instructions once you have established a recipe.

Print Reports

From the Recipes & Menus option, select Recipes.
Note
Prior to running the Recipe Usage and Projected Meal Cost reports, you must select a recipe from the list.
Click Print. Then, select a report.

Expand

title	Recipe Listing - Lists all recipes

1. Establish report criteria. Then, click Ok.
  Image Removed
2. Print or export the report.
  Image Removed

Expand

title	Recipe Nutrient Composition - Lists all recipes

1. Select if you would like to Show All Nutrient Data in the report criteria. Then, click Ok.
  Image Removed
2. Print or export the report.
  Image Removed

Expand

title	Recipe Usage - Select a single recipe

1. Select which options you would like to include in the report. Then, click Ok.
  Image Removed
2. Print or export the report.
  Image Removed

AnchorED13187ED13187

Expand

title	Projected Meal Cost - Select a single recipe

1. Establish projected meal cost options.
  1. Click Change Source to change analysis source criteria.
    Image Removed
  2. (optional) Click Add Menu to add additional menus to the projected meal cost.
  3. Enter meal counts for the Meal Count Types (e.g. K-6, 6-8, 9-12).
    Image Removed
2. Click Print and select Projected Meal Cost Analysis.
3. Establish report criteria. Then, click Ok.
  Image Removed
4. Print or export the report.
  Image Removed
  Image Removed

AnchorED13525ED13525

Expand

title	Recipe Tracking Log - Select a single recipe

Image Removed

Return to Top

AnchorRecipe CategoriesRecipe CategoriesRecipe Categories

Recipe Categories assist in establishing balanced meals and meal components.

From the Recipes & Menus option, select Recipe Categories.
Enter a new recipe category by clicking in the cell next to the asterisk * or click Jump to New Row. Then, click Save Changes.
Note
title Deleting a Recipe Category
To remove a recipe category, select a category and click Delete. The category cannot be in use.
Note
title Searching for a Recipe Category
To locate a recipe category in your list, click Find. Then, begin typing the category name in the search bar.
Image Removed

Return to Top

AnchorRecipe DeliveryRecipe DeliveryRecipe Delivery Units

Menu Count Types are applied to Recipes under the Yield & Serving Sizes tab.

Info

title	Recipe Delivery Units

Recipe Delivery Units exist to maintain the integrity of a legacy option.

From the Recipes & Menus option, select Recipe Delivery Units.
Establish new recipe delivery units. Then, click Save Changes.
1. Description - Enter a new Recipe Delivery Unit description.
2. Volume (mL) - Enter the number in mL if the unit can be broken down; otherwise, leave blank.
  Image Removed

Return to Top

AnchorMenu Count TypesMenu Count TypesMenu Count Types

Menu Count Types are applied to Manufacturing Groups for Recipes under the Yield & Serving Sizes tab.

From the Recipes & Menus option, select Menu Count Types.
Establish new menu count types. Then, click Save Changes.
1. Description - Enter a new Menu Count Type description.
2. Category - Use the drop-down menu to select the correct category (Student Reimbursable, Adult Meal, Other).
3. Nutrient Standards - Use the drop-down menu to select one or more nutrient standards to apply.
4. Food Patterns - Use the drop-down menu to establish one or more food patterns.
  Image Removed

Return to Top

AnchorFat ChangeFat ChangeFat Change Types

Fat contents of foods change depending on how a recipe or item is prepared for consumption. You can apply Fat Change Types to a Recipe under the Nutrition tab. For additional information, refer to pages 79-80 of the USDA's School Meal Nutrient Analysis Protocols.

From the Recipes & Menus option, select Fat Change Types.
You may add fat change types by entering a description next to the asterisk * and entering fat changes or clicking Import from USDA.
Image Removed
Use the Search tool to locate and select the correct item from the USDA list (if available) or click Food Buying Guide to locate and select the item (if available). Then, click Ok.
Image Removed
Once you have completed adding Fat Change Types, click Save Changes.

Expand

title	Example of how nutritional values change after Fat Change Types are applied.

Info

When applying fat and moisture changes to a recipe, the nutritional information must be recalculated. Click Ok to continue with the process when prompted.

Image Removed

Standard Recipe

Image Removed

Recipe Prepared by Cooking in Peanut Oil - Fat Changes Only
Image Removed

Recipe Prepared by Cooking in Peanut Oil -Fay and Moisture Changes
Image Removed

Return to Top

AnchorCritical ControlCritical ControlCritical Control Points

The USDA has established Hazard Analysis and Critical Control Points (HACCP) in regards to preparation and serving. Additional CCPs may be added. For more information, refer to the USDA website.

From the Recipes & Menus option, select Critical Control Points.
Scroll to the bottom of the Critical Control Point Maintenance screen and establish new CCPs next to the asterisk *. Then, click Save Changes.
1. Description - Enter each new critical control point description.
2. SOP Category - Use the drop-down menu to select a Standard Operating Procedure (SOP).
3. Hazard - Type in the type of hazard that may result from not following proper procedures.
4. Critical Limit - Enter the critical limit and additional details, such as how often the temperature should be checked.

Info

title	Critical Limits

For every Critical Control Point (CCP) identified, there must be a Critical Limit (CL), or a parameter to indicate whether or not the control measure is, in fact, controlling the identified hazards.

Image Removed

Return to Top

AnchorMenusMenusMenus

Menus are created by adding recipes and adding one or more menus to a menu template. You also have the ability to merge menus and run nutrient reports.

From the Recipes & Menus option, select Menus.

Add a new menu to the list of available menus by clicking Add New.

Note

title	New Menu as a Copy

When adding a new menu as a copy, all established components of the existing menu will be carried forward.

Image Removed

Select if the menu should be created As a new blank menu or As a copy of the currently selected menu. Then, click Ok.

Image Removed

AnchorED15711ED15711Establish new menu details. When you are done, click Save Changes.

Enter details to create the menu.

Info

title	External Description

The External Description is for Districts that utilize additional resources for meals, such as external meal calendars or apps.

Use the Search for Recipes tool to locate a recipe. Then, you may drag and drop or double-click on a recipe to add it to the menu.

Tip

title	Did You Know?

You can resize the work and search areas by using the ↔ which appears when you hover over the space between the two areas.

Clicking the arrow next to "Search for Recipes" will collapse the search area and give you more room to work. You may choose to use the Add Recipe to Menu button in the ribbon.

AnchorED16098ED16098Link recipes with entreés - Note that entreés are bold. By placing a checkmark in the box of a non-entreé recipe, it associates that specific recipe in conjunction with the entreé. Once a recipe is linked, it becomes indented to display association. Recipes that are not linked to an entreé apply to the entire menu. Info

title	Link to Entreé - Location Matters

If multiple entreés exist on a menu and you choose to utilize the Link to Entreé feature, be sure you drag and drop or use the Move Up/Move Down buttons so that recipes are directly associated with the chosen entreé.
Location is not a issue for recipes that are unlinked.

^{_{In the example below, Veggies Stir-Fry Blend (5626) is a component of the Broccoli Beef w/fried rice entreé and Chips and Queso (HS 7039) is a component of the All-Beef Hot Dog Meal Deal entreé. Because Peaches, Canned (5104) is not linked, it is a component of both entreé meals.}}
Image Removed

Print Reports

While in the Edit Menu window, you may choose to print the View Usage report or the Weighted Nutrient Analysis report.

View Usage

Note

title	Menu Usage Report

You can run the Menu Usage report once the menu has been added to a Menu Template and/or Meal Planning has occurred.

Select a menu from the Menu Maintenance list. Then, click Edit.
Tip
title Did you know?
You may also use the Search area to locate a recipe.
Select View Usage.
Select which options to include in the report. Then, click Ok.
Image Removed
You may choose to print or export the report. After you have finished printing or exporting, click Close Print Preview.
Image Removed

AnchorED12448ED12448Weighted Nutrient Analysis

Select a menu from the Menu Maintenance list. Then, click Edit.
Select Weighted Nutrient Analysis.
The Weighted Nutrient Analysis tab will appear. Click the Print button and select Weighted Nutrient Analysis, Weighted Nutrient Analysis: Details by Recipe, or Detailed Worksheet by Nutrient report.
1. Add Menu - If you would like to add another menu for analysis, click Add Menu and select a menu from the list. Then, click Ok.
2. Remove Menu - Removes an entire menu from the list. You must confirm you wish to remove the menu.
3. Add Serving Day - Allows a serving day to be added for analysis.
4. Remove Serving Day - Allow you to remove a serving day. You must confirm you wish to remove the serving day.
5. Meal Counts - If Meal Counts have not been added, you may add them by expanding the plus + sign.
  Image Removed

Advanced Menu Options

AnchorED15640ED15640Menu Merge

The menu merge feature allows you to merge multiple menus into one menu. This is helpful for cleanup, especially in circumstances where you are unable to delete an old menu.

From the Menu Maintenance window, select a menu from the list. Then, click Advanced from the ribbon and select Merge Menus.
Image Removed
The wizard will appear to guide you through the process. Click Next.
Image Removed
Select one or more menus from the list by placing a checkmark in the box(es). Then, click Next.
Image Removed
Select the menu you wish to keep. This will allow you to keep the menu number while merging the other menus. Then, click Next.
Image Removed
You must review changes before continuing as merging menus affects Menu Templates and Meal Planning for sites. If you are okay with the changes that will be applied, click Next.
Image Removed
You need to confirm and apply the merge of XX number of menus to complete the process. Click Finish.
Image Removed

Return to Top

AnchorMenu CategoriesMenu CategoriesMenu Categories

From the Recipes & Menus option, select Menu Categories.
Establish new menu categories next to the row with the asterisk *. Then, click Save Changes.
1. Description - Enter a new menu category description.
2. Menu Category Kind - Use the drop-down menu to select the correct menu category.
  Image Removed

Return to Top

AnchorMenu TemplatesMenu TemplatesMenu Templates

Menu Templates allow recipes to be created for meals, date ranges established, and then templates applied to sites. (e.g. Elementary Breakfast - 1/2 c scrambled egg, 1 slice whole wheat toast, 4 oz juice; Middle School Breakfast - 3/4 c scrambled egg, 1 1/2 slice toast, 6 oz juice)

From the Recipes & Menus option, select Menu Templates.

Click Add to create a new menu template or select an existing template and click Edit.

AnchorED11815ED11815

Tip

title	Did You Know?

You can create menu templates in a test database and export them and import them into the live database.

Image Removed AnchorED11816ED11816Select if you would like to add a new blank template or a copy of the currently selected template. Then, click Ok.

Image Removed

Establish Menu Template details.

Expand

title	Menu Template Features

View - Allows you to change how you view the calendar.

Include Saturdays
Include Sundays
Show Recipe Detail - Shows all items included in the recipe for the meal.
Image Removed
Row Height - Allows you to adjust the size of the rows so all items are visible when more than one recipe is allocated for a day or when viewing recipe details.
Image Removed

AnchorED15710ED15710Print - Allows you to print various records and reports

Calendar - Allows you to print a menu calendar based upon a number of options.

Tip

title	Did You Know?

When printing the calendar,

Image Removed

Menu Template Details

Weighted Nutrient Analysis

Meal Pattern Analysis

Expand

title	Tracking Log

Image Removed

Change Serving Type - Allows you to change the type of serving for the day by selecting a day and using the drop-down menu.

Image Removed
Edit Daily Alert - Allows you to add, edit, or clear an alert for a date.

Description - Enter a description for the menu template.
Meal Type - Use the drop-down menu to select a meal type.
Start Date - Use the calendar tool to select a start date.
End Date - Use the calendar tool to select an end date.
Image Removed

Add a menu for a day by selecting a day and clicking Edit Day or double-clicking on a selected date.

Establish a menu template for the day. When you are done, click Ok. AnchorED15631ED15631Expected ServiceType for <Meal> on <Day of Week, mm/dd/yyyy> - Use the drop-down menu to select a service type for the date. Menus - Use one of the following options to add a menu to menu planning: AnchorED12382ED12382Search for Menus - Use the Search tool to locate and select a specific menu from the Menu

Anchor

	Top
	Top

Panel

bgColor	#ffffff
titleColor	#ffffff
titleBGColor	#3783E3
title	Overview

The Recipes & Menus section will take you through the process of editing and adding recipes, recipe categories, recipe delivery units, menu count types, fat change types, critical control points, menus, menu categories, menu templates, and production areas.

Table of Contents

Opening Recipes & Menus

This procedure is used to access all processes in the Recipes & Menus section.

Locate and click the Admin & Maintenance tab. Next, click on the Recipes & Menus option.

Image Added

Anchor
Recipes
Recipes
Recipes

After items have been added to the system, recipes are created. Recipe creation allows you to add a description, recipe number, short description, external description and code for broadcasting purposes, required temperature (if applicable), and photo. You have the ability to select a recipe category, menu item type, delivery mode, and production area. Steps and ingredients are entered to produce a recipe. This can be set up in order for a recipe to be manufactured from scratch (such as blueberry muffins) or assembled (such as Asian chicken salad). Total recipe yield, delivery units, manufactured item (if applicable), nutritional values, and serving sizes (which may vary between grades) are also established.

From the Recipes & Menus option, select Recipes.

Info

title	The Recipe Maintenance Window

The Recipe Maintenance window displays the Recipe Number, Description, Short Description, recipe Category, Menu Item Type, Manufactures Item (Item # resulting from manufacturing), Manufacturing Group, Inactive recipes, and comments if a recipe Needs Attention.

Click Add Recipe. If you are adding to a recipe that already exists, locate and click on the recipe before selecting Add Recipe.
Note
You may also select an item and click Edit Recipe or Delete Recipe.
Image Added
Select how you would like to create a new recipe.
1. As a new blank recipe - Information in all tabs is blank.
2. As a copy of the currently selected recipe - By default, the first recipe is already selected. You may highlight a recipe from the list and create a copy. All information from the existing recipe is carried over to the copy.
  Image Added
Establish all recipe components. Then, click Save Changes.
Anchor
EDISON11119
EDISON11119

Expand

title	Recipe Info

Recipe Info allows you to enter a long, short, and external description, recipe number, export code, recipe category, menu item type, delivery mode, HACCP information such as temperature, process type, and production area. You can also enter pan size, number of pans, a photograph of the completed recipe, and flag a recipe that needs further attention.

Establish Recipe Info.

1. Description - Enter a description of the recipe.
  Recipe Description has a maximum length of 255 characters.
2. Recipe Number - Enter the recipe number.
3. Short Description - Enter a short description of the recipe.
4. External Description - Enter an external description of the recipe. (Used to broadcast recipes to the web.)
5. Export Code - Enter the export code. (Used to broadcast recipes to the web.)
6. Recipe Category - Use the drop-down menu to select a recipe category (Breads/Grains, Entree, Fruit/Veg, Milk, Uncategorized).
7. Menu Item Type - Use the drop-down menu to select a menu item type (Entree, Side Dish, Milk, Condiment, Non-food Item, Other).
8. Delivery Mode - Use the drop-down menu to select a delivery mode (Any, Ready To Assemble, Ready To Serve).
9. Temperature (F) - Enter a temperature to display on the recipe instructions.
10. Pan Size - Enter the size of the pan to display on the recipe instructions. (Not required.)
11. Number of Pans - Enter the number of pans a recipe will yield to display in the recipe instructions. (Not required.)
12. Process Type - Use the drop-down menu to select the HACCP process type (No Cook, Same Day Service, Complex Food Preparation).
13. Require Temperature Log - Requires temperature to be entered during Production process.
14. Production Area - Use the drop-down menu to select a production area (Bread, Default, Dessert, Fruit, Main Dish, Side, Vegetable).
15. Photo - Allows you to attach a photo of the finished recipe.
16. Needs Attention - If there is a possible issue with the recipe (nutrition contribution, missing item, etc.), place a checkmark in the box and enter a statement.
  Image Added

Uploading a Photograph

1. Click on the image icon Image Added.
2. An image box will appear. Right-click in the box and select Load.
  Image Added
3. Locate a select the file on your local or network drive. Then, click Open.
  Image Added
4. The image will appear in the window. Click Ok.
  Image Added

Anchor

	ED12354
	ED12354

Anchor

	ED12728
	ED12728

Anchor

	ED18490a
	ED18490a

Expand

title	Steps & Ingredients

Steps & Ingredients allows you to establish steps for preparing, creating, cooking, and warming recipes.

Establish Steps & Ingredients.

1. Step Title - Enter a step on the row with the asterisk *.
  Note
  When you begin to enter information into the Step Title field, the Step # will appear as a code until you click outside of that row.
2. Critical Control Point (CCP) - Use the drop-down menu to select from a list of CCPs (if applicable).
3. Instructions - Enter a list of instructions in the drop-down menu. These will appear on the recipe instructions report.
4. Photo - Photographs can be added at the step level by following the same procedures under Recipe Info.
  Image Added

Add Ingredients to Steps

Click the plus + sign to expand a step.

Enter a Catalog Number or Description in the correct column. Then, press Enter on the keyboard to open a list of items.

Tip

title	Did You Know?

When an item is selected in a recipe, you may right-click and "jump to" the selected item in Item Maintenance, delete the ingredient/item from the recipe, and print/export the recipe grid.
Image Added

Image Added

Select the correct item from the list. Then, click Ok.
Image Added
Enter a measurement.
Note
The weight will automatically be calculated according to item setup.
Image Added

Repeat the process until all ingredients and steps have been added.

Calculate Recipe Cost

Calculate Recipe Cost allows you to see the real-time cost of the recipes.

From the steps and ingredients ribbon, select Calculate Recipe Cost.
Configure the settings for your recipe cost per serving. When finished, select Ok.
Image Added
Image Added

Expand

title	Yield & Serving Sizes

Yield & Serving Sizes allows you to establish totals for each completed recipe and how a recipe can be distributed, determine if the recipe produces a completed item through manufacturing, and establish serving sizes depending on menu count types.

Info

title	Delivery Unit/Delivery Sub-Unit

Delivery Unit and Delivery Sub-Unit are typically not selected. These exist to maintain the integrity of a legacy option.

Establish Yield & Serving Sizes.

Yield

1. Yield - Use the drop-down menu to select a measurement type. Then, enter a quantity for the total the recipe yields/creates.
  Note
  You may enter free-text when selecting each (ea) to identify what "each" represents (e.g. slice, 2 oz. cup).
2. Delivery Unit - Use the drop-down menu to select a delivery unit. Then, enter the number of base-units from the yield quantity per delivery unit.
3. Delivery Sub-Unit - Use the drop-down menu to select a delivery sub-unit. Then, enter the number of base-units from the yield quantity per sub-delivery unit (if applicable).
4. Manufactures Item - Links or creates a recipe to an item/manufactured item.
  Note
  title Manufacturing and Inventory Counts
  By completing the manufacturing process, ingredient items will be removed from inventory. The completed item will be placed in inventory for availability.
  
  Info
  title Gear Icon
  Clicking the gear icon opens the linked or created item in a new tab.
  1. Link an Item to a Recipe - Place a checkmark in the box to activate the magnifier icon to search and select an item from the list of available items.
  2. Create a Manufactured Item from a Recipe - Click the plus icon to create a new manufactured item. A tab will open allowing you to complete Item setup details for the newly manufactured item.
5. Manufacturing Group - Use the drop-down menu to select the correct manufacturing group (if applicable). Typically, Central Kitchens will use this option.
  Image Added

Serving Sizes

Serving Sizes can be established when portion sizes vary.

1. Establish serving sizes where applicable.
  1. Description - Enter a description.
  2. Portion Size - Enter the portions for the serving size description. (e.g. Grades 6-8 receive .75 cup of diced fruit; Grades K-5 receive 2 mini muffins)
  3. Unit - Units are designated during item setup and cannot be changed.
  4. Weight - Weight is designated during item setup and cannot be changed.
  5. Servings - The number of servings will automatically recalculate once portion size is entered.
  6. Servings per Delivery Unit - Servings per Delivery Unit are designated during item setup and cannot be changed.
  7. Menu Count Types - Place a checkmark in each Menu Count Type to designate which portion sizes will be served.
2. Click the plus sign cent to each serving size description to establish food contributions.
  Image Added

Expand

title	Nutrition

Nutritional information is provided for recipes based on nutritional factors established in Items or by keying values from the food label. Additionally, fat and moisture changes can change nutritional values due to cooking.

Establish Nutrition.

1. If nutritional values do not exist, click Key from Food Label or edit nutritional information at the Item level. You may run the Calculate Nutrition report for additional details.
2. Fat change after cooking - Use the drop-down menu to select a Fat Change Type. Then, enter the percentage of fat change.
3. Moisture change after cooking - Enter the percentage of moisture change after cooking.
  Info
  Nutrition will need to be recalculated if fat or moisture changes are applied. To view an example of how fat and moisture percentages change after applied, review the example in Fat Change Types.
4. This recipe is a grain-based dessert - Place a checkmark in the box is the recipe is a grain-based dessert.
  Image Added

Key from Food Label

1. If nutritional values are not present, click Key from Food Label.
2. Enter nutritional values. Then, click Ok.
  1. Nutritional Information is per - Use the drop-down menu to select a measurement. Then, enter the numerical value.
  2. Enter USDA Nutrient values.
    Image Added

Calculate Nutrition

1. To review calculated nutritional values, click Calculate Nutrition.
2. Uncheck the box if you do not want to Show All Nutrient Data. Then, click Ok.
  Image Added
3. Review the report. You may choose to print or export the report. After you have finished printing or exporting, click Close Print Preview.
  Image Added
  Image Added

Anchor

	ED13679
	ED13679

Expand

title	Notes and Comments

The tab includes free text blocks for Comments, Production Notes & Serving Notes. WinFSIM conversions will prefill the note tab should a recipe include any of the above notes. When printing a manufacturing recipe, if the site printing the recipe does not manufacture, the production & serving notes will print & the manufacturing instructions will not print.

Enter necessary Comments, Production Notes, and Serving Notes that you would like to include in reports.

Image Added

Anchor

	ED11649
	ED11649

Expand

title	Allergens

The Allergens tab allows to you review allergens within a recipe.

Info
In order for allergens to appear, they must be established at the item level (e.g. Grilled cheese recipe - milk and wheat allergens will be carried forward from noting milk as an allergen in cheese and wheat as an allergen in bread).

Image Added

You may wish to Test Print Instructions once you have established a recipe.

Print Reports

From the Recipes & Menus option, select Recipes.
Note
Prior to running the Recipe Usage and Projected Meal Cost reports, you must select a recipe from the list.
Click Print. Then, select a report.
Image Added

Expand

title	Recipe Listing - Lists all recipes

1. Establish report criteria. Then, click Ok.
  Image Added
    Group Records By - Use the drop-down menu to select how to group and subgroup records.
      (none), Production Area, Recipe Category, Menu Item Type
    Options - Select one or more options to include in the report
2. Print or export the report.
  Image Added

Expand

title	Recipe Nutrient Composition - Lists all recipes

1. Select if you would like to Show All Nutrient Data in the report criteria. Then, click Ok.
  Image Added
2. Print or export the report.
  Image Added

Expand

title	Recipe Usage - Select a single recipe

1. Select which options you would like to include in the report. Then, click Ok.
  Image Added
2. Print or export the report.
  Image Added

Anchor

	ED13187
	ED13187

Expand

title	Projected Meal Cost - Select a single recipe

1. Establish projected meal cost options.
  1. Click Change Source to change analysis source criteria.
    Image Added
      Date Range - Use the calendar tools to select a date range.
      Meal Type - Select one or more meal types.
      Source - Select a meal cost source.
          Manual Entry - Recipes must be added from the "Add Menu" button and meal count types entered manually.
          Menu Planning Counts - Uses planned, offered, or service counts from a specific site.
          Menu Template - Uses manually entered counts or the sum of planned counts for a specific template.
          Specific Recipe - Uses a specific recipe and meal count types are entered manually.
  2. (optional) Click Add Menu to add additional menus to the projected meal cost.
  3. Enter meal counts for the Meal Count Types (e.g. K-6, 6-8, 9-12).
    Image Added
2. Click Print and select Projected Meal Cost Analysis.
3. Establish report criteria. Then, click Ok.
  Image Added
    Contract Date - Use the calendar tool to select a contract date.
    Use Prices for Site - Use the magnifier tool to locate a specific site.
    Favor Donated or Purchased - Select how catalog numbers should be favored.
    Favor Price - Select which catalog price should be favored.
    Run for each site in the filter - The report will be run separately for each site while grouping the entire District into one printable file.
4. Print or export the report.
  Image Added
  Image Added

Anchor

	ED13525
	ED13525

Expand

title	Recipe Tracking Log - Select a single recipe

Image Added

Advanced

Search and Replace Recipe on Menus

Search for and replace a single menu on multiple selected menu templates and planned sites within a specified date range

From the Admin & Maintenance tab, select Recipes and Menus and then Recipes.
Select a recipe with which you wish to replace recipes within the menu. Then, select Advanced and choose Search and Replace Recipe on Menus from the drop-down menu.
Image Added
Use the wizard to guide you through search for and replacing items on recipes with a different ingredient.
1. Select next to confirm you have selected the correct ingredient.
  Image Added
2. Type in a search word to filter your results. When you find the ingredient you were searching for, select it and click Next.
  Image Added
3. Use the filters to create your search scope. Then, click Next.
  Image Added
  Search Menu Templates - searches across all menu templates.
  Search Site Planning - Searches all sites by default, or you can select a specific site by selecting the radio button and selecting a site from the drop-down. Or, search by Category and Cluster, or Named Site Filter.
  Search templates and planning for date range - Select the drop-down menu to see a Calendar to select a specific planning date range.
  Search Menus - searches across all menus.
4. A list will be generated for all of the affected menus. Here, you can unselect any menus you do not want to be affected. When finished, click Next.
  Image Added
5. Confirm that the desired changes will be made. If you are not satisfied, you can select the Back button to make different changes. Then, select Finish to apply your changes.
  Image Added

Return to Top

Anchor
Recipe Categories
Recipe Categories
Recipe Categories

Recipe Categories assist in establishing balanced meals and meal components.

From the Recipes & Menus option, select Recipe Categories.
Enter a new recipe category by clicking in the cell next to the asterisk * or click Jump to New Row. Then, click Save Changes.
Note
title Deleting a Recipe Category
To remove a recipe category, select a category and click Delete. The category cannot be in use.

Note
title Searching for a Recipe Category
To locate a recipe category in your list, click Find. Then, begin typing the category name in the search bar.
Image Added

Return to Top

Anchor
Recipe Delivery
Recipe Delivery
Recipe Delivery Units

Menu Count Types are applied to Recipes under the Yield & Serving Sizes tab.

Info

title	Recipe Delivery Units

Recipe Delivery Units exist to maintain the integrity of a legacy option.

From the Recipes & Menus option, select Recipe Delivery Units.
Establish new recipe delivery units. Then, click Save Changes.
1. Description - Enter a new Recipe Delivery Unit description.
2. Volume (mL) - Enter the number in mL if the unit can be broken down; otherwise, leave blank.
  Image Added

Return to Top

Anchor
Menu Count Types
Menu Count Types
Menu Count Types

Menu Count Types are applied to Manufacturing Groups for Recipes under the Yield & Serving Sizes tab.

From the Recipes & Menus option, select Menu Count Types.
Establish new menu count types. Then, click Save Changes.
1. Description - Enter a new Menu Count Type description.
2. Category - Use the drop-down menu to select the correct category (Student Reimbursable, Adult Meal, Other).
3. Nutrient Standards - Use the drop-down menu to select one or more nutrient standards to apply.
4. Food Patterns - Use the drop-down menu to establish one or more food patterns.
  Image Added

Return to Top

Anchor
Fat Change
Fat Change
Fat Change Types

Fat contents of foods change depending on how a recipe or item is prepared for consumption. You can apply Fat Change Types to a Recipe under the Nutrition tab. For additional information, refer to pages 79-80 of the USDA's School Meal Nutrient Analysis Protocols.

From the Recipes & Menus option, select Fat Change Types.
You may add fat change types by entering a description next to the asterisk * and entering fat changes or clicking Import from USDA.
Image Added
Use the Search tool to locate and select the correct item from the USDA list (if available). Then, click Ok.
Image Added
Once you have completed adding Fat Change Types, click Save Changes.

Expand

title	Example of how nutritional values change after Fat Change Types are applied.

Info

When applying fat and moisture changes to a recipe, the nutritional information must be recalculated. Click Ok to continue with the process when prompted.

Image Added

Standard Recipe

Image Added

Recipe Prepared by Cooking in Peanut Oil - Fat Changes Only
Image Added

Recipe Prepared by Cooking in Peanut Oil -Fay and Moisture Changes
Image Added

Return to Top

Anchor
Critical Control
Critical Control
Critical Control Points

The USDA has established Hazard Analysis and Critical Control Points (HACCP) in regards to preparation and serving. Additional CCPs may be added. For more information, refer to the USDA website.

From the Recipes & Menus option, select Critical Control Points.
Scroll to the bottom of the Critical Control Point Maintenance screen and establish new CCPs next to the asterisk *. Then, click Save Changes.
1. Description - Enter each new critical control point description.
2. SOP Category - Use the drop-down menu to select a Standard Operating Procedure (SOP).
3. Hazard - Type in the type of hazard that may result from not following proper procedures.
4. Critical Limit - Enter the critical limit and additional details, such as how often the temperature should be checked.

Info

title	Critical Limits

For every Critical Control Point (CCP) identified, there must be a Critical Limit (CL), or a parameter to indicate whether or not the control measure is, in fact, controlling the identified hazards.

Image Added

Return to Top

Anchor
Menus
Menus
Menus

Menus are created by adding recipes and adding one or more menus to a menu template. You also have the ability to merge menus and run nutrient reports.

From the Recipes & Menus option, select Menus.
Add a new menu to the list of available menus by clicking Add New.
Note
title New Menu as a Copy
When adding a new menu as a copy, all established components of the existing menu will be carried forward.
Image Added
Select if the menu should be created As a new blank menu or As a copy of the currently selected menu. Then, click Ok.
Image Added

Anchor

	ED15711
	ED15711

Establish new menu details. When you are done, click Save Changes.

Enter details to create the menu.
Info
title External Description
The External Description is for Districts that utilize additional resources for meals, such as external meal calendars or apps.

Use the Search for Recipes tool to locate a recipe. Then, you may drag and drop or double-click on a recipe to add it to the menu.

Tip

title	Did You Know?

You can resize the work and search areas by using the ↔ which appears when you hover over the space between the two areas.

Clicking the arrow next to "Search for Recipes" will collapse the search area and give you more room to work. You may choose to use the Add Recipe to Menu button in the ribbon.

Anchor

	ED18490b
	ED18490b

Tip

title	Did You Know?

When a recipe is selected in a menu, you may right-click and print/export the menu grid.

Image Added

Anchor

	ED16098
	ED16098

Link recipes with entreés - Note that entreés are bold. By placing a checkmark in the box of a non-entreé recipe, it associates that specific recipe in conjunction with the entreé. Once a recipe is linked, it becomes indented to display association. Recipes that are not linked to an entreé apply to the entire menu.

Info

title	Link to Entreé - Location Matters

If multiple entreés exist on a menu and you choose to utilize the Link to Entreé feature, be sure you drag and drop or use the Move Up/Move Down buttons so that recipes are directly associated with the chosen entreé.

Location is not an issue for recipes that are unlinked.

Image Added
  Description - Enter the description of the menu.
  Menu Number - Enter a menu number using alphanumeric characters.
  Short Desc - Enter a short description of the menu to appear during menu planning.
  External Description - Enter a description to be displayed to parents and students.
  Export Code - Enter the export code for eternal info distribution.
  Menu Category - Select a menu category from the drop-down menu.
  Meal Type - Select a Meal Type from the drop-down menu.
  Inactive - Select the checkbox to inactivate a menu.
  Search for Recipes - Use the search tools to narrow search results.
  Search - Enter part or all of a recipe name.
  Menu Item Type - Select a menu item type from the drop-down menu, e.g. entree, side dish, etc.
  Food Contributions - Select one or more food contributions from the drop-down menu.

Print Reports

While in the Edit Menu window, you may choose to print the View Usage report or the Weighted Nutrient Analysis report.

View Usage

Note

title	Menu Usage Report

You can run the Menu Usage report once the menu has been added to a Menu Template and/or Meal Planning has occurred.

Select a menu from the Menu Maintenance list. Then, click Edit.
Tip
title Did you know?
You may also use the Search area to locate a recipe.
Select Print, then choose View Usage.
Select which options to include in the report. Then, click Ok.
Image Added
You may choose to print or export the report. After you have finished printing or exporting, click Close Print Preview.
Image Added

Anchor

	ED12448
	ED12448

Weighted Nutrient Analysis

Select a menu from the Menu Maintenance list. Then, click Edit.
Select Print, then choose Weighted Nutrient Analysis.
The Weighted Nutrient Analysis tab will appear. Click the Print button and select Weighted Nutrient Analysis, Details by Recipe, or Detailed Worksheet by Nutrient report.
1. Add Menu - If you would like to add another menu for analysis, click Add Menu and select a menu from the list. Then, click Ok.
2. Remove Menu - Removes an entire menu from the list. You must confirm you wish to remove the menu.
3. Add Serving Day - Allows a serving day to be added for analysis.
4. Remove Serving Day - Allow you to remove a serving day. You must confirm you wish to remove the serving day.
5. Meal Counts - If Meal Counts have not been added, you may add them by expanding the plus + sign.
  Image Added

Advanced Menu Options

Anchor

	ED15640
	ED15640

Menu Merge

The menu merge feature allows you to merge multiple menus into one menu. This is helpful for cleanup, especially in circumstances where you are unable to delete an old menu.

From the Menu Maintenance window, select a menu from the list. Then, click Advanced from the ribbon and select Merge Menus.
Image Added
The wizard will appear to guide you through the process. Click Next.
Image Added
Select one or more menus from the list by placing a checkmark in the box(es). Then, click Next.
Image Added
Select the menu you wish to keep. This will allow you to keep the menu number while merging the other menus. Then, click Next.
Image Added
You must review changes before continuing as merging menus affects Menu Templates and Meal Planning for sites. If you are okay with the changes that will be applied, click Next.
Image Added
You need to confirm and apply the merge of XX number of menus to complete the process. Click Finish.
Image Added

Search and Replace Menu

Search for and replace a single menu on multiple selected menu templates and planned sites within a specified date range. Choose between leaving planned recipes as is or remapping planned recipes.

From the Admin & Maintenance tab, select Recipes and Menus and then Menus.
Select a menu with which you wish to replace within a specified date range.
Image Added
Select Advanced, and then choose Search and Replace Menu from the drop-down menu.
Use the wizard to guide you through search for and replacing menus.
1. Select Next to confirm you have selected the correct menu.
  Image Added
2. Type in a search word to filter your results. When you find the menu you were searching for, click Next.
  Image Added
3. Use the filters to create your search scope. Then, click Next.
  Image Added
  Search Menu Templates - searches across all menu templates.
  Search Site Planning - Searches all sites by default, or you can select a specific site by selecting the radio button and selecting a site from the drop-down. Or, search by Category and Cluster, or Named Site Filter.
  Search templates and planning for date range - Select the drop-down menu to see a Calendar to select a specific planning date range.
4. Select how you would like your planned recipes to be remapped to the new menu's recipes. When finished, click Next.
  Image Added
5. A list will be generated for all of the affected menus. Here, you can unselect any menus you do not want to be affected. When finished, click Next.
  Image Added
6. Confirm that the desired changes will be made. If you are not satisfied, you can select the Back button to make different changes. Then, select Finish to apply your changes.
  Image Added

Return to Top

Anchor
Menu Categories
Menu Categories
Menu Categories

From the Recipes & Menus option, select Menu Categories.
Establish new menu categories next to the row with the asterisk *. Then, click Save Changes.
1. Description - Enter a new menu category description.
2. Menu Category Kind - Use the drop-down menu to select the correct menu category.
  Image Added

Return to Top

Anchor
Menu Templates
Menu Templates
Menu Templates

Menu Templates allow recipes to be created for meals, date ranges established, and then templates applied to sites. (e.g. Elementary Breakfast - 1/2 c scrambled egg, 1 slice whole wheat toast, 4 oz juice; Middle School Breakfast - 3/4 c scrambled egg, 1 1/2 slice toast, 6 oz juice)

From the Recipes & Menus option, select Menu Templates.
Click Add to create a new menu template or select an existing template and click Edit.
Anchor
ED11815
ED11815
Tip
title Did You Know?
You can create menu templates in a test database and export them and import them into the live database.

Image Added

Note
The MealViewer Time Block column is only available if you have created Time Blocks in MealViewer Time Block Maintenance.
Anchor
ED11816
ED11816
Select if you would like to add a new blank template or a copy of the currently selected template. Then, click Ok.
Image Added

Establish Menu Template details.

Expand

title	Menu Template Features

View - Allows you to change how you view the calendar.

Include Saturdays
Include Sundays
Show Recipe Detail - Shows all items included in the recipe for the meal.
Image Added
Row Height - Allows you to adjust the size of the rows so all items are visible when more than one recipe is allocated for a day or when viewing recipe details.
Image Added

Anchor

	ED15710
	ED15710

Print - Allows you to print various records and reports. The Print option is also available in the main Menu Template window.

Calendar - Allows you to print a menu calendar based upon a number of options.
Tip
title Did You Know?
When printing the calendar, non-service days are displayed?

Image Added
  Date Range (Inclusive) - Use the calendar tools to select a From and To date range.
  Options - Select one or more of the options to include in the printout.
  Include Menus - Select one or more Meal Category Kinds to include in the printout.
  Include Recipes - Select one or more Menu Item Type recipes to include in the printout.

Image Added
Menu Template Details
Weighted Nutrient Analysis
Meal Pattern Analysis
Expand
title Menu Template Tracking Log
Image Added

Expand

title	Carbohydrate Analysis

Establish report criteria for the selected Menu Template. Then, click Ok.
Image Added
Date Range (Inclusive) - Use the calendar tool to select a From and To date range.
Menu Count Type - Select a menu count type to include in the report.

Image Added

Change Serving Type - Allows you to change the type of serving for the day by selecting a day and using the drop-down menu.
Image Added

Edit Daily Alert - Allows you to add, edit, or clear an alert for a date.

Description - Enter a description for the menu template.
Meal Type - Use the drop-down menu to select a meal type.
MealViewer Time Block - Use the drop-down menu to select a time block.
Note
The MealViewer Time Block drop-down menu is only available if you have created Time Blocks in MealViewer Time Block Maintenance.
Start Date - Use the calendar tool to select a start date.
End Date - Use the calendar tool to select an end date.

Image Added

Add a menu for a day by selecting a day and clicking Edit Day or double-clicking on a selected date.

Establish a menu template using the options on the ribbon at the top of the page. When you are done, click Ok.

Image Added

Anchor
ED15631
ED15631
Expected ServiceType for <Meal> on <Day of Week, mm/dd/yyyy> - Use the drop-down menu to select a service type for the date.

Menus - Use one of the following options to add a menu to menu planning:

Anchor
ED12382
ED12382
Search for Menus - Use the Search tool to locate and select a specific menu from the Menu tab located on the right. Then, double-click or drag and drop the menu to the template.
Info
You may narrow a search by using the drop-down menu to select a Menu Category.
Anchor
ED15723
ED15723
Create New Menu - Create a menu on the fly by entering a Menu Number, Description, and clicking Quick-Add Menu. Then, click the Recipes tab or Add Recipe button to search for and add recipes from the list.

Add Menu - Click the Add Menu button and use the Search tool to locate and select a specific menu.

Anchor

	ED18490d
	ED18490d

Tip

title	Did You Know?

When a menu is selected in a menu template, you may right-click and Print/Export Grid Data, "Jump to" the selected menu in Menu Maintenance, Remove the menu from the menu template, or Search and Replace the Menu.
Image Added

Anchor
ED12095
ED12095
Move Menu Up/Down - You may reorder how menus appear on the template by selecting a menu and using the Move Menu Up or Move Menu Down buttons.
Anchor
ED16110
ED16110
Flatten Menus (Optional) - Once you have completed adding menus and recipes to a day, you may wish to flatten the menus. This process will merge all menus and recipes into one menu for preparation and production. (e.g. You have a burger menu that contains a recipe for cheeseburger, lettuce, tomatoes, onions, fries, and applesauce as part of the menu. You have a pork slider menu that contains pork slider, onion, corn, and applesauce as part of the menu. Once a menu is flattened, all menus and recipes are combined to form one menu.)

Recipes - Use one or more of the following options to add a recipe to a menu:
1. Search for Recipes - Use the Search tool to locate and select a specific recipe from the Recipe tab located on the right. Then, double-click or drag and drop the recipe to a menu to the template.
  Info
  You may narrow a search by using the drop-down menu to select a Menu Category.
  AnchorED15723ED15723Create New Menu - Create a menu on the fly by entering a Menu Number, Description, and clicking Quick-Add Menu. Then, click the Recipes tab or Add Recipe button to search for and add recipes from the list.
2. Add Menu - Click the Add Menu button and use the Search tool to locate and select a specific menu.
Recipes - Use one or more of the following options to add a recipe to a menu:
Search for Recipes - Use the Search tool to locate and select a specific recipe from the Recipe tab located on the right. Then, double-click or drag and drop the recipe to a menu.
Info
You may narrow a search by using the drop-down menu to select a Menu Item Type and selecting one or more Food Contributions.
Add Recipe - Click the Add Recipe button and use the Search tool to locate and select a specific recipe.

Anchor

ED12095a

Move Recipe Up/Down - You may reorder how recipes appear on the template by selecting a menu and using the

Move Recipe Up

or

Move Recipe Down

buttons.

Link to Entreé

- Note that

entreés are bold

. By placing a checkmark in the box of a non-entreé recipe, it associates that specific recipe in conjunction with the entreé. Once a recipe is linked, it becomes indented to display association. Recipes that are not linked to an entreé apply to the entire menu.

Anchor

ED16883

Info

title	Link to Entreé - Location Matters

If multiple entreés exist on a menu and you choose to utilize the

Link to Entreé

feature, be sure you "drag and drop" or use the

Move Up

/

Move Down

buttons so that recipes are directly associated with the chosen entreé.

Location is not a issue for recipes that are unlinked.

Anchor

ED16110

Flatten Menus (Optional)

- Once you have completed adding menus and recipes to a day, you may wish to flatten the menus. This process will merge all menus and recipes into one menu for preparation and production. (e.g. You have a burger menu that contains a recipes for cheeseburger, lettuce, tomatoes, onions, fries, and applesauce as part of the menu. You have a pork slider menu that contains pork slider, onion, corn, and applesauce as part of the menu. Once a menu is flattened, all menus and recipes are combined to form one menu.)

the drop-down menu to select a Menu Item Type and selecting one or more Food Contributions.

Add Recipe - Click the Add Recipe button and use the Search tool to locate and select a specific recipe.

Anchor

	ED18490c
	ED18490c

Tip

title	Did You Know?

When a recipe is selected in a menu template, you may right-click and "jump to" the selected recipe in Recipe Maintenance, Search and Replace the recipe, or remove the recipe from the menu template.
Image Added

Anchor
ED12095a
ED12095a
Move Recipe Up/Down - You may reorder how recipes appear on the template by selecting a menu and using the Move Recipe Up or Move Recipe Down buttons.

Link to Entreé - Note that entreés are bold. By placing a checkmark in the box of a non-entreé recipe, it associates that specific recipe in conjunction with the entreé. Once a recipe is linked, it becomes indented to display association. Recipes that are not linked to an entreé apply to the entire menu.

Anchor

	ED16883
	ED16883

Info

title	Link to Entreé - Location Matters

If multiple entreés exist on a menu and you choose to utilize the Link to Entreé feature, be sure you "drag and drop" or use the Move Up/Move Down buttons so that recipes are directly associated with the chosen entreé.

Location is not an issue for recipes that are unlinked.

Expand

title	View More Data - Meal Contributions

The View More Data drop-down menu allows you to review meal contributions and nutrients for a menu count type and recipe cost while you are building menu templates.

To review Meal Contributions and Nutrients for a Menu Count Type:

From the Edit Menu Template screen, select a menu.
Click on View More Data, then select Food Contribution and select a Menu Count Type to review.

If you have multiple menus on your template to review, click on other menus. The Menu Count Type focus remains the same.

Info

title	Review Meal Contributions for a Different Menu Count Type

To review contributions for a different Menu Count Type, click Meal Contributions and select a different type.

Info

title	Close Meal Contributions

To close reviewing meal contributions, click Meal Contributions and click on the selected Menu Count Type to remove the checkmark.

Note

title	Review Meal Contributions for a Different Day

Click Cancel to return to the calendar view. If you select a different day, the last Menu Count Type focus remains until you close out of the selected menu template.

Image Added

Anchor

	ED17469
	ED17469

Expand

title	View More Data - Recipe Cost

The View More Data drop-down allows you to review meal contributions and nutrients for a menu count type and recipe cost while you are building menu templates.

To see real-time plate count costs for your recipes:

From the Edit Menu Template screen, select a menu.
Click on View More Data, then select Recipe Cost.
Configure the settings for your Recipe Cost view.
Image Added

Now that you have identified the recipe cost criteria, you will see columns for Purchase Cost, Donated Value, and Total Value within the recipes.

Tip
Check/Uncheck the recipes to see the real-time costs change.

Image Added

Anchor
ED12969
ED12969
Daily Alert - Adds an alert to a day and displays on the menu template, menu planning, and production for the established day.
Image RemovedImage Added

Image Removed

Image Added

Image Removed

Image Added

Repeat the process for each day.
(Optional) Copy and paste a day or a number of days/cycle.
Anchor
ED15723
ED15723
Tip
If you right-click on your mouse, you have faster access to the tools in the Selection group of the ribbon?

Anchor
ED15745
ED15745
Copy one day
1. Click on the day you wish to copy. Then, click Copy or right-click and select Copy.
2. Click on the day you wish the recipe to appear and click Paste or right-click and select Paste.

Copy multiple days/cycle

Tip

title	Did you know?

For pasting, it is good practice to select/highlight at least the minimum amount of days that were copied to avoid errors.

Note
When copying and pasting a cycle, the Serving Type does not carry over. You must change the serving type as needed.

a. Click on the first day and drag to the last day using your mouse. Then, click Copy.

b. Click and drag the date range where you wish the menu cycle to repeat. Then, click Paste Cycle.

When you are done, click Save Changes.

Return to Top

Anchor
Production Areas
Production Areas
Production Areas

Recipe can be designated by Production Areas.

From the Recipes & Menus option, select Production Areas.
Enter each new production area group in the cell next to the asterisk * or click Jump to New Row. Then, click Save Changes.

Note

title	Deleting a Production Area

To remove a production area, select an area and click Delete. The area cannot be in use.

Note

title	Searching for a Production Area

To locate a production area in your list, click Find. Then, begin typing the area name in the search bar.

Image RemovedImage Added

Return to Top

Anchor
Manufacturing Groups
Manufacturing Groups
Manufacturing Groups

From the Recipes & Menus option, select Manufacturing Groups.
Enter each new manufacturing group in the cell next to the asterisk * or click Jump to New Row. Then, click Save Changes.

Note

title	Deleting a Manufacturing Group

To remove a manufacturing group, select a group and click Delete. The group cannot be in use.

Note

title	Searching for a Manufacturing Group

To locate a manufacturing group in your list, click Find. Then, begin typing the group name in the search bar.

Image RemovedImage Added

Return to Top

Anchor
MassUpdate
MassUpdate
Mass-Update

The Mass Updates option allows you to easily apply changes to some fields in Recipes and Menus instead of modifying each individually.

From the Recipes & Menus option, select Mass Update. Then, select which mass update to complete.

Anchor
MURecipe
MURecipe
Recipes

Make necessary changes to Recipe information. Then, click Save Changes.

Recipe Number
Description
Short Desc
Recipe Category
External Description
Do Not Display Externally

Menu Item Type
Export Code
Delivery Mode
Production Area
Manufactures Item

Manufacturing Group
Require Temp. Log
HACCP Process Type
Needs Attention
Inactive

Image RemovedImage Added

Anchor
MUMenu
MUMenu
Menus

Make necessary changes to Menu information. Then, click Save Changes.

Menu Number
Description
Short Desc

Menu Category
Meal Type
External Description

Export Code
Menu Group
Inactive

MealViewer Menu Groups

Select a MealViewer Menu Group for each applicable menu. Then, click Save Changes.

Image Added

Return to Top

Versions Compared

Old Version 30

New Version Current

Key

Opening Recipes & Menus

Uploading a Photograph

Add Ingredients to Steps

Yield

Serving Sizes

Key from Food Label

Calculate Nutrition

Print Reports

Print Reports

Advanced Menu Options

Opening Recipes & Menus

Anchor
Recipes
Recipes
Recipes

Uploading a Photograph

Add Ingredients to Steps

Calculate Recipe Cost

Yield

Serving Sizes

Key from Food Label

Calculate Nutrition

Print Reports

Anchor
Recipe Categories
Recipe Categories
Recipe Categories

Anchor
Recipe Delivery
Recipe Delivery
Recipe Delivery Units

Anchor
Menu Count Types
Menu Count Types
Menu Count Types

Anchor
Fat Change
Fat Change
Fat Change Types

Anchor
Critical Control
Critical Control
Critical Control Points

Anchor
Menus
Menus
Menus

Print Reports

Advanced Menu Options

Anchor
Menu Categories
Menu Categories
Menu Categories

Anchor
Menu Templates
Menu Templates
Menu Templates

Anchor
Production Areas
Production Areas
Production Areas

Anchor
Manufacturing Groups
Manufacturing Groups
Manufacturing Groups

Anchor
MassUpdate
MassUpdate
Mass-Update

Anchor
MURecipe
MURecipe
Recipes

Anchor
MUMenu
MUMenu
Menus

MealViewer Menu Groups

Page Comparison

Versions Compared

Old Version 30

New Version Current

Key

Opening Recipes & Menus

Uploading a Photograph

Add Ingredients to Steps

Yield

Serving Sizes

Key from Food Label

Calculate Nutrition

Print Reports

Print Reports

Advanced Menu Options

Opening Recipes & Menus

AnchorRecipesRecipesRecipes

Uploading a Photograph

Add Ingredients to Steps

Calculate Recipe Cost

Yield

Serving Sizes

Key from Food Label

Calculate Nutrition

Print Reports

AnchorRecipe CategoriesRecipe CategoriesRecipe Categories

AnchorRecipe DeliveryRecipe DeliveryRecipe Delivery Units

AnchorMenu Count TypesMenu Count TypesMenu Count Types

AnchorFat ChangeFat ChangeFat Change Types

AnchorCritical ControlCritical ControlCritical Control Points

AnchorMenusMenusMenus

Print Reports

Advanced Menu Options

AnchorMenu CategoriesMenu CategoriesMenu Categories

AnchorMenu TemplatesMenu TemplatesMenu Templates

AnchorProduction AreasProduction AreasProduction Areas

AnchorManufacturing GroupsManufacturing GroupsManufacturing Groups

AnchorMassUpdateMassUpdateMass-Update

AnchorMURecipeMURecipeRecipes

AnchorMUMenuMUMenuMenus

MealViewer Menu Groups

Anchor
Recipes
Recipes
Recipes

Anchor
Recipe Categories
Recipe Categories
Recipe Categories

Anchor
Recipe Delivery
Recipe Delivery
Recipe Delivery Units

Anchor
Menu Count Types
Menu Count Types
Menu Count Types

Anchor
Fat Change
Fat Change
Fat Change Types

Anchor
Critical Control
Critical Control
Critical Control Points

Anchor
Menus
Menus
Menus

Anchor
Menu Categories
Menu Categories
Menu Categories

Anchor
Menu Templates
Menu Templates
Menu Templates

Anchor
Production Areas
Production Areas
Production Areas

Anchor
Manufacturing Groups
Manufacturing Groups
Manufacturing Groups

Anchor
MassUpdate
MassUpdate
Mass-Update

Anchor
MURecipe
MURecipe
Recipes

Anchor
MUMenu
MUMenu
Menus