Page Comparison

Quantities needed during the ordering process are determined by:

• Menus on the calendar starting with the current date and ending with the selected date
• Ingredients on the recipes containing planned serving counts
• Scaling the recipes
• Ingredients on pending orders
• Ingredients on-hand 

From the Home tab, select Order.

Anchor
New Order New Order

Create a New Order

1. Click Create New Order from the Action tab.
   
   
   
2. Begin the ordering process by following the wizard and click Next.
   
   
   

3. Use the drop-down menu to select an ordering group. Then, click Next.
   

   Note
   Ordering Groups must first be configured in Admin & Maintenance > Ordering & Price Contracts.

   
   
   

4. Use the calendar icon to select the delivery date in which to receive the order. You may also choose to Show All Available Items on the price contract. Then, click Next.

   Note
   title Requested Delivery Date/Price Contract Date
   This date will be used to determine which price contract needs to be used.

   
   

   Info
   title Show All Available Items
   When selecting Show All Available Items, items which are not part below par-level, needed for planned meals, or filled from the selected site appear in the order list with zero (0) quantities. These item quantities will be highlighted pink to reduce confusion.

   

5. Select options on how to automatically estimate your ordering needs. Then, Click Next.
   

   Anchor
   EDISON11162 EDISON11162

   Info
   title Default Planning Dates
   Default planning dates are established by Central Office staff under Administration → Ordering & Price Contracts → Ordering Group Configs.

   

           Items below par-order levels - When the quantity on-hand falls below the minimum quantity, the item will automatically be listed on the order and the quantity will be prefilled to at least the maximum quantity.
           Items needed for planned meals between - Establish a date range by using the calendar tools.
                 Meal Types - Use the drop-down menu to deselect/select one or more meal types for planned meals within the established date range.
           Items ordered to be filled from this site - Establish a date range by using the calendar tools. This option is typically used by a Central Warehouse or Central Kitchen during manual ordering. Leaving this option checked will not have a negative effect if this does not apply to you.
           Items needed for predicted orders from all sites based on planned meals between - Establish a date range by using the calendar tools.
                  

   Note
   title Items needed for predicted orders from all sites based on planned meals between
   This option is typically used by a Central Warehouse or Central Kitchen for advanced vendor ordering to ensure there is enough inventory available to fill site orders. Selecting this option disables additional ordering options.

   
   
   

6. Click Finish to start your order.

   Note
   title Ordering Criteria
   Edison looks at meal planning counts, inventory on-hand, and quantities being removed from current inventory in order to assist with ordering the correct quantities of each item.

   
   

   Note
   You will see a series of processes running while the order is generating. Some processes, such as predictive ordering, may take longer.

   

7. Anchor
   ED12385 ED12385

   Anchor
   ED12237 ED12237

   Review the generated order items and quantities by looking in the Quantity column and the Max Quantity Available column.

   Warning
   If there is an insufficient quantity available for the selected item, the Max Qty Available column will be highlighted red.

   
   

   Info
   title Adjusting Order Quantities
   You can make adjustments to the quantity ordered by clicking in the cell. For more details, refer to the instructions under the Add/Remove Item section.

   
   

   Note
   title Show All Available
   If you chose to Show All Available Items in the Ordering Wizard, items which are not part below par-level, needed for planned meals, or filled from the selected site appear at the bottom of the order list with zero (0) quantities. These item quantities are highlighted pink to reduce confusion.

   
   

   Warning
   title View Worksheet
   If an issue exists with the order, such as an unavailable catalog number, the View Worksheet button will blink. It is highly recommended you run problem reports before completing your order. Refer to Step 11 for more information.

   
   

   Anchor
   Add Item Add Item

   Add/Remove Item

8. Click Add Item to add a new item from the order list.

   

9. Anchor
   ED12534 ED12534

   Use the Search box to locate a specific item. Then, select the correct item(s) by placing a checkmark in the cell for the correct item. When you have completed selecting all items, click Ok.
   

10. New order items will be added to the end of the list. Review the Max Quantity Available column. Then, enter the amount necessary to order under the Quantity column. Repeat this process for each new item added to the order.

    Info
    To remove an item, select the row. Then, click Remove Item.

    

    Expand
    title Custom Inventory Fields
    Custom Inventory Fields can be added by your District to be entered into an order. If setup, the custom fields will be available above the order item list.

    
    
    

11. Anchor
    Step 11 Step 11

    (Optional): View Worksheet for Automatic Meal Ordering.

    1. To review or print the worksheet prior to saving changes and completing the order, click View Worksheet.

    2. Anchor
       Step11b Step11b

       Select a report option. Then, click Ok.
       

       Info
       If the View Worksheet button is blinking, it is recommended that you run reports to Include a summary of all items with problems or Include details of all items with problems.

       
       
       

       The Ordering Worksheets reports display:

       • Encumbrance needs for earlier planning - Considers quantities necessary for issue and production prior to the next received order. These items quantities will not be available to fulfill menu counts for the current order.
       • Encumbrance quantities met - Considers quantities available and ordered to fulfill encumbrances outside the planning dates.
       • Real needs for date range, incoming orders, par levels - Quantities needed for the specified date range of the order.
       • Real needs met by unencumbered inventory, order - Quantities on-hand or previously ordered (minus encumbrances) to meet the needs for the specified date range of the order.

       • Remaining quantities needed to be ordered - Planned quantities and quantities on-hand to determine ordering needs (if necessary) for the specified date range of the order.

         Warning
         If you receive the warning You do not have enough inventory on-hand/on-order to fulfill encumbrances prior to order range, you have low quantities on-hand/on-order for the selected date range. The system will not automatically change order quantities. You will need to adjust your item quantities on the existing order or add item quantities to a future order.

         
         

         Warning
         If you receive the warning Catalog number not available for order, that item is not on a Price Contract and cannot be ordered until it has been added to one. You should inform the Central Office staff when this message appears on a report.

         
         

         Tip
         You may choose to Print or Export the report.

         
         

         Info
         If you do not have enough inventory on-hand or in an order to fulfill encumbrances prior to the order range, it will be noted on the worksheet.

         
         

         Expand
         title Include summary of all items

         
         

         Expand
         title Include details of all items

         
         

         Expand
         title Include summary of all items with problems

         
         

         Expand
         title Include details of all items with problems

         
         

         Expand
         title Include details of only the selected item

         
         

12. Enter any necessary comments to include with the order. When you have completed the order, click Save Changes and Complete Order.
    
    

    Warning
    If you have a higher quantity than the max available for an item, you will receive a notification that there is Insufficient Quantity on Hand and you will be unable to complete your order until it is fixed. Image Added

    
    

    Note
    This completes the order for final review prior to sending the order for processing. Your order will not be sent to final review until you have selected this option.

    
    

    Info
    You may also choose to Save Changes. This will save changes to your existing order, but will not complete the order for processing.

    
    

    Info
    title Minimum order amount/minimum case amount
    The Order screen contains a Total Case count and a Total Order amount. If a minimum order amount or minimum case amount has been established for a vendor, a message will appear if you have not met the minimum order requirements. Higher permissions may be required for approval for those orders not meeting minimum requirements. For full details, refer to Edison's FAQs.

    Anchor
    ED13034 ED13034

    

13. Once you have saved changes and completed the order, it may be automatically sent to the vendor/warehouse or placed in a pending queue to await review and approval by your site supervisor or central office staff.

    Expand
    title Orders automatically sent to vendor/central kitchen/warehouse
    You must print or export the order to complete the ordering process. Print or export the order report. To close the report, select Close Print Preview or click the X at the top of the window. If you have chosen to close the order without printing, the following message will appear. Click OK to continue.

    
    

14. Anchor
    ED11507 ED11507

    Anchor
    ED13183 ED13183

    Click OK to continue if you receive the following message:

    Expand
    title Orders pending supervisor review and approval
    You may print or export the Order Details report; however, it is not required at this level. To close the report, select Close Print Preview or click the X at the top of the window. Once your order has been completed, you will receive a message that supervisor approval is needed. Click OK.

    
    

    Expand
    title Orders pending central office review and approval
    You may print or export the Order Details report; however, it is not required at this level. To close the report, select Close Print Preview or click the X at the top of the window.

    
    

Return to Top

Anchor
ReviewApprove ReviewApprove

Review and Approve Pending Orders

Some orders may require the manager or central office staff to review and approve the order. Review "I created my order. What's the next step?" for more details.

1. From the Home tab, select Review and Approve Orders.
2. Select and double-click on an order to review. Next, make adjustments to the order and Save Changes (if necessary) and close the Order tab. Then, click Approve Order.
   

Return to Top  

Anchor
Edit Order Edit Order

Edit Order

In cases where an order has been created and saved, but not yet completed, you may choose to edit an order.

In the Action tab, select an order from the list to make changes. Then, click Edit Order and complete necessary additions, deletions, and quantity adjustments.

Return to Top  

Anchor
Delete Order Delete Order

Delete Order

On occasion it may be necessary to delete an order that has been created, but not yet completed.

1. Select the order from the list to delete. Then, click Delete Order.
2. Confirm you wish to permanently delete the order by clicking Yes.
   

Return to Top